|
|
|
|
|
Model
: CC-421
VOLTAGE/CURRENT CALIBRATOR
• Display : 0-1/2 Digits 1999 Counts LCD
• Provides 0-19.99mA & 0-24 mA current source
• Measure 0-19.99 mA & 0-24mA current
• Provides 0- ±199.9 mV DC Output
• Provides Power and Current measurement of two loop Wire in
the range of 0-19.99mA / 0-24mA
• Has basic accuracy of ±0.25% |
|
|
|
Model
: FG-2000
FUNCTION GENERATOR
• Has Frequency Bandwidth of 0.2 ~ 2MHz
• Provides Sine wave, Triangle wave, Saw Wave and
Rectangular Wave output
• Provides signal amplitude output of 16Vp-p
• Provides amplitude attenuation: 0dB, -20dB, -40dB
• Sine Wave Distortion is <=2%
• TTL/CMOS Output amplitude is >= 3Vp-p
• DC level and duty cycle is adjustable
• Square wave rise time <=2nS
• Output Resistance is 50W ±10%
• Outer measurement frequency 0.1Hz – 2NHz
• Has 6 digits Red LED Display |
|
|
|
Model
: 9205A
SWEEP FUNCTION GENERATOR
• Used as a Function Generator, Pulse Generator and Sweep
Generator
• Provides Sine, Triangle, Square, Pulse, Ramp. TTL Square
Wave and Skewed Sine Waveform outputs.
• Provides Sync. Out (TTL Square Waveform)
• Has VCF Input tunable by 0 to –10V DC.
• Has DC Offset continuously variable, greater than ±10V
(open Circuit)
• Has Frequency Counter that measures from 10Hz – 3MHz
• Provides AM Modulation waveform
• Has Sweep Function
• Has Frequency Bandwidth of 3MHz |
|
|
|
Model
: 1682
WHEATSTONE BRIDGE
• OXFORD Brand Wheatestone Bridge
• Used for Measuring Low resistance
• Measuring Range from 0.001W
to 11.0mW
• With built-in galvanometer of sensitivity of 20uA / mm
• Comes complete with Battery
• Housed in Wooden Body
• Has accuracy ±0.05% of series arm and ±0.02% for Ratio Arm
• Accuracy confirm to Grade AIS-1565-1966 |
|
|
Model : 1612
KELVIN DOUBLE BRIDGE
• OXFORD Brand Kalvin Double Bridge
• Used to measure very low resistances
• Measures in the rage of 0.2uW
to 11W
• Has an accuracy of ±0.05% ±1 small division of the
slideware
• Provides maximum current of 10A intermittently and 5A
continuous
• Comes complete with Spot Light galvanometer, heavy Duty,
High Current, Power Supply and conductivity Arrangement |
|
|
Model : FC-1000
DIGITAL FREQUENCY MULTIFUNCTION COUNTER
• Intelligent Dual Channel Frequency Counter
• Measures upto 1GHz
• 8 Digits LED Display
• Dual Channel Input
• Input Voltage Sensitivity upto 20mV rmp
• High Stability |
|
|
Model : FC-2400
DIGITAL PRECISION INTELECTIVE MULTIFUNCTION COUNTER
• Intelligent Dual Channel Frequency Counter
• Range and Gate Time can be adjusted continuous from 100nS
~ 10S
• 8 Digit LED Display provides clear reading
• Dual Channel Input
• Has selective range and high stability
• Frequency Measurement can be done from 0.01Hz ~ 2.4GHz
• Period Measurement can also be done
• Input Sensitivity is 30mV rms
• 230V Signal Phase AC 20Hz operated |
|
|
Model : DT-8250
DIGITAL AC/DC CLAMP METER
(Auto-Ranging)
• Display : 3-3/4 Digits, 3999
Counts LCD
• DC Voltage : 0 – 4V – 1000V
• Accuracy : ±1%
• AC Voltage : 0 – 4V ~ 750V
• Accuracy : ±1.5%
• AC Current : 0 – 400 / 2000A
• Accuracy : ±2%
• Resistance : 0 – 400W
~ 40MW
• Accuracy : ± 1%
• Frequency : 0 – 99.99Hz – 999.9kHz
• Accuracy : ±1%
• Clamp Jaw : 55mm Dia.
• Diode Test, Audible Continuity Test, Data Hold, Relative
Measurement and Auto Power Off. |
|
|
Model : DT-9250
DIGITAL AC/DC CLAMP METER
(Auto-Ranging)
• Display : 3-3/4 Digits, 3999
Counts LCD
• DC Voltage : 0 – 4V – 1000V
• Accuracy : ±1%
• AC Voltage : 0 – 4V ~ 750V
• Accuracy : ±1.5%
• AC Current : 0 – 400 / 2000A
• Accuracy : ±2%
• Resistance : 0 – 400W
~ 40MW
• Accuracy : ± 1%
• Frequency : 0 – 99.99Hz – 999.9kHz
• Accuracy : ±1%
• Clamp Jaw : 55mm Dia.
• Diode Test, Audible Continuity Test, Data Hold, Relative
Measurement and Auto Power Off. |
|
|
|
<<BACK
|
NEXT >> |
|
Page |
1 -
2 -
3 -
4
-
5 -
6 -
7 -
8 |
|
