Model : HT3004CT
DIGITAL INFRA-RED THERMOMETER CUM THERMO-HYGRO METER

• Display : Large Dual Bakelite LCD display
• Simultaneous display of temperature & Humidity
• Measuring Range : Temperature (Infra-Red Thermometer Mode):- 50°C to 500° C, -58°F to 932°F Humidity: 0%RH ~ 100%RH
• High Temperature accuracy ± 2.1\0% ±2°C/4°F
• Fast Response for humidity measurement
• Resolution: 0.1 for temperature up to 200° and 1 for temperature over 200° 0.1% RH
• Data Hold and Max. Hold facility
• Auto Power Off, Low Battery Indication
• Semiconductor Sensor for temperature incorporates as infra red Non Contact thermometer.
• Has fixed emissivity of 0.95
• With Semiconductor sensor temperature can be measured from –20°C to 60°C/ -4°F ~ 140°F.
• °C / °F Switchable

Model : HT3005
DIGITAL THERMO-HYGRO METER

• Display : Large Dual Bakelite LCD display
• Simultaneous display of temperature & Humidity
• Measuring Range :
Temperature: -20°C to 1000° C, -4°F to 18322°F
Humidity: 0%RH ~ 100%RH
• High Temperature accuracy
• Fast Response for humidity measurement
• Resolution: 0.1°F and 0.1°C or 1°F and 1°C, 0.1% RH
• Data Hold and Max. Hold facility
• Auto Power Off, Low Battery Indication
• Semiconductor Sensor for temperature measurement
• In addition to this K type thermocouple can also be used to measure temperature.
• With Semiconductor sensor temperature can be measured fro –20°C to 60°C / -4°F ~ 140°F
• °C / °F Switchable

Model : OS-5010
OSCILLOSCOPE

• 10MHz Single channel Portable type
• Vertical Deflection factor: 10mV ~ 10V/ Div.
• Sweep Time Factor: 0.1uS/Div. ~ 0.1S/Div.
• Trigger Sensitivity: Int: 1.5 Div and Ext.: 0.3 Div.
• X-Y Mode Deflection
Factor: 0.2V/Div ~ 0.5V/Div.
• Calibration Signal: Square wave of 0.5V @ 1kHz
• 230V AC 50Hz Operated
• Supplied with 1:1 & 10:1 attenuation Probes
• Confirms to EN61010-1 and EN-IEC61326-1

Model : OS-5020
OSCILLOSCOPE

• 20MHz Dual Trace Dual Channel
• Vertical Deflection factor : 5mV ~ 10V/ Div in 11 steps.
• Rising Time : <=18ns and <=70ns by MAG
• Trigger Source : Y1, Y2, ALT, POWER EXT
• Min. : Trig: 5Hz ~ 20 MHz
Synchronized Internal Sig.: 0.1 Div
Trigger Level & Ext. Sig. : 0.2Vp~p
TV: Int 2 Div, Ext 0.3Vp~p
Trig Lock (20Hz ~ 10MHz)
Int 2 Div
• Horizontal Deflection sweep rate: 0.1uS/Div to 0.2S/Div. In 20 Step
• X-Y Mode Deflection Factor: 5mV/Div ~ 10V/Div.
• Z axis Min Input Level TL Level
System: Max Input voltage 50V (DC+ACp-p) Frequency Range CD ~ 5MHz
• Calibration Signal: 0.5V Square wave @ 1kHz
• CTR display area: 8 Div x 10 Div (1 Div = 1 cm)
• Supplied with 2 Nos. 1:1 & 10:1 Switchable attenuation Probes
• Confirms to EN61010-1 and EN-IEC61326-1

Model : OS-5030
OSCILLOSCOPE

• 30MHz Dual Trace Dual Channel
• Vertical Deflection factor : 5mV/Div ~ 10V/ Div in 11 steps.
• Rising Time : <=12ns
• Trigger Source : Y1, Y2, ALT, LINE, EXT
• Min. : Trig: 5Hz ~ 30 MHz
Synchronized Internal Sig.: 0.5 Div
Trigger Level & Ext. Sig. : 0.2Vp~p
TV: Int 2 Div, Ext 0.3Vp~p
Trig Lock (20Hz ~ 10MHz)
Int 2 Div
• Horizontal Deflection sweep rate: 0.1uS/Div to 0.2S/Div. In 20 Step
• X-Y Mode Deflection Factor: 5mV/Div ~ 10V/Div.
• Z axis Min Input Level TTL Level
System: Max Input Voltage 50V (DC+ACp-p) Frequency Range CD ~ 5MHz
• Calibration Signal: 0.5V Square wave @ 1kHz
• CTR display area: 8 Div x 10 Div (1 Div = 1 cm)
• Supplied with 2 Nos. 1:1 & 10:1 Switchable attenuation Probes
• Confirms to EN61010-1 and EN-IEC61326-1

Model : OS-5060
OSCILLOSCOPE

• 60MHz Dual Trace Dual Channel
• Vertical Deflection Factor : 5mV/Div ~ 5V/ Div.
• Horizontal System Sweep Mode: x1, x10; x1, x10 alter
• Horizontal System Sweep Rate: 0.1uS/Div. ~ 0.2S/Div. In 20 steps
• Has X-Y Display mode
• Trigger system mode includes: auto, normal, TV-V, TV-H
• Trigger system source includes INT, CH2, Line, EXT
• For Z-Axis max. input Voltage is 30V
• Provides Calibration Signal of .5V Square wave @1kHz
• CRT display area of 8 Div x 10 Div (1 Div = 1 cm)
• Supplied with two Nos. 1:1 & 10:1 switchable probes.
• Confirms to EN61010-1 and EN-IEC61326-1

• 100MHz Dual Trace Dual Channel
• Vertical Deflection Factor : 5mV/Div ~ 5V/ Div.
• Horizontal System Sweep Mode: A, B, B TRIG’D, X-Y, ALT
• Horizontal System Sweep Rate:
A: 0.05uS/Div. ~ 0.2S/Div.
B: 0.05uS/Div. ~ 10uS/Div.
• Has X-Y Display mode
• Trigger system mode includes: auto, normal, TV-V, TV-H
• Trigger system source includes INT, CH2, Line, EXT
• For Z-Axis max. input Voltage is 30V
• Provides Calibration Signal of .5V Square wave @1kHz
• CRT display area of 8 Div x 10 Div (1 Div = 1 cm)
• Supplied with two Nos. 1:1 & 10:1 switchable probes.
• Confirms to EN61010-1 and EN-IEC61326-1

DSO-5060
DIGITAL STORAGE OSCILLOSCOPE

• 60MHz Dual Channel Digital Storage Oscilloscope
• Coloured VGA display
• Sampling Rate: 100Msa/s
• Storage Memory: 16K/ch
• Vertical Sensitive (/DIV): 2mV ~ 5V
• Vertical resolution: 8Bit
• Rise Time: 3.5nS
• Time-base Range (/DIV): 2.5nS ~ 5S/div
• Trig Source: CHI, CH2, Ext, Ect/5, Line
• Trig Mode: Auto, Normal, Single-Time
• Max. Input Voltage: 400V (DC+AC peak)
• Auto Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Freq, Rise Time, Fall Time, Period, +Width, +Width
• Cursor Measurement: Manual, Trace, Auto-Measurement
• Storage Function: 5 waves, 5 setups
• Power Supply: 100V ~ 240V/50W max

<<BACK

Page  |  1 - 2  - 3 - 4 - 5  - 6  - 7 - 8 |