Centrifuge And Shakers

3161 Centrifuge Hand Driven.
A single speed machine consisting of a substantial cast base enclosing a pinion and worm drive. One thumb screw clamps the machine to the bench. The head with captive trunnion rings, accommodates two 15ml. buckets. In synthetic hammer finish, with removable crank handle. Complete with 2 buckets & 2 glass centrifuge tube.

3162 Centrifuge Hand Driven : Same as above, accommodates four 1ml, buckets complete with 4 buckets and glass centrifuge tubes.

3176 Shaking Machine : Wagners Type (End-Over-End-Shaker) run by H.P. 220V ac, fixed speed 30 rpm. app., belt system. Rotation spindle supported on ball bearing, which to a heavy base. The spindle carries seating and adjustable caps to accommodate bottles and flasks (Without bottles and flasks)
For 6 bottles in 2 Rows.
 

3177 For 12 bottles in 2 Rows.

3180 Sieve Shaker : Hand operated, suitable for laboratory as well as in the fields. It can accommodate 200mm diameter sieves. The base plate of he shaker has holes for fixing on bench on table.

3181 Sieve Shaker, Gyratory type: Mechanically operated to reproduce the gyratory motion, there is upward and downward movement at frequency of 270 vibration per minutes (approx.) ensuring that each square mm of the sieve is utilized. It can accommodate 200 mm diameter sieves. Fitted with ¼ ph single phase motor. For operation on 220 V A.C. supply. Without test sieves and time switch.

3182 Sieve Shaker, Gyratory Type : Same as above with time switch for any interval upto 60 minutes.

3191 Magnetic Stirrer :  Suitable for any type of stirring operations involving volumes from a very little quantity of liquid upto one litre. Stirring is accomplished by means of small rotor sealed in teflon and is capable of rotating by magnetic field underneath at different speed which is controlled by a regulator. Hot Plate can also be fitted for heating the liquid before or during the operation stirring.
a) With Hot Plate
b) Without Hot Plate
c) With Hot Plate and Energy Regulator.

3192 Laboratory Stirrer : Comprises of fractional H.P. a motor fitted on chrome plated rod with heavy cast iron base. The height as well as the angle of the motor can be adjusted as desired.

Stainless steel shaft is fitted with the motor for stirring purpose. The speed is controlled by a regulator from low to high.

3200 Melting Point Apparatus : Electrically operated, useful for determination of single or mixed melting points upto 300° C. Consists of an aluminium block with built in electric heating element. The aluminium block accepts 3 capillary melting point tubes and a mercury thermometer. The lamp mounted block is illuminated from below by a lamp which provides uniform and shadow-less illumination of the complex tube which are viewed through the adjustable lens. The temperature is regulated by a rotary switch but without capillary tubes and without thermometer. The outer body is of cast aluminium.

3201 : Retort & Tripod Stand
Retort stand bases (rectangular) with rods: cast iron base, black painted, , with hole screwed. Iron rod (shafting) 500 x 10 mm, length x diameter, screwed one end, black painted. base size in mm 175 x 100, 175 x 125, 150 x 100 weight in Kg (approx) 0.9, 1.15, 0.65

3202 Retort stand bases (rectangular) with rods : Cast iron base, black painted, with hole screwed, Iron rod (shafting) 12.5mm diameter screwed one end, black painted.
Base size 200x125 225x150
Base weight in Kg (approx) 600 750

<< BACK

Page No. |  1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23 |