A single speed machine consisting of a sUbstantial cast base enclosing a pinion and worm drive One thumb screw clamps the machine to the bench. The head with captive trunnion rings, accommodates two 1 5 ml. buckets. In synthetic hammer finish, with removable crank handle. Complete with 2 buckets & 2 glass centrifuge tube.

Same as above, accommodates four 1 ml" buckets complete with 4 buckets and 4 glass centrifuge tubes.

Four tubes (4 x 15) ml. with swing out head which lumetric determination and separation of fluid. The centrifuge is fitted with a built multistage speed regulator Complete with 4 buckets of 15ml capacity and 4 glass centrifuge tubes. Workable on 220 volts A. C. and D. C. supplies.

recommended for the sediment to be deposited horizontal. Volumetric determination and separation of fluid. The cetrifuge is fitted with a built multistage speed regulator Complete with 4 buckets of 15ml capacity and 4 glass centrifuge tubes. Workable on 220 volts A. C. and D. C. supplies.

C. supplies.

Designed for all shaking operations of the laboratory Kahn's racks bottles or flasks of different sizes can be shaken by adjusting wooden compartment provided in the tray. The size to the tray is 50 x 32 cms. The rate of motion can be adjusted by the mechanical arrangement provided in the pulley, Oscillation 275 to 280 per minute. Complete with 1/4 H.P. motor single phase and 2 meter cable of three core and workable on 220 V A. C. 50 Hz.

Same as above but motor equipped with variable pitch pulley system permitting variable speed by means of knob.

Wrist action-fitted with fractional H. P. motor to work on 220 V/AC 50 Hz. Flasks mounting spindle to Oscillate through a small amplitude, sturdy eccentric mechanism provides effective mechanical shaking, can hold 100ml. to 500ml conical flasks. the shaking speed is controlled by speed regulator.
Capacity for 4 flasks, for 8 flasks, by side clamps.

Shaking Machine as 1260 with 0-60' minute time switch in the circuit, operating current starts when dial knob is turned to any desired interval upto 60 minutes and automatically cuts off when knob returns to zero and machine will cease to function after expiry of the setting time.

Wagners Type (End-Over-End Shaker) run by 1/4 H.P. 220V ac, fixed speed 30 rpm app. belt system. Rotating spindle supported on ball bearing, which are mounted on upright fixed to a heavy base. The spindle carries seatings and adjustable caps to accommodate bottles and flasks (Without bottles and flasks)

flasks (Without bottles and flasks)
for 6 bottles in 2 Rows

Hand operated. suitable for laboratory as well as in the fields. It can accommodate 200 mm diameter sieves. The base plate of the shaker has holes for fixing on bench or table.

Type Mechanically operated to reproduce the gyratary motion, there is upward and downward movement at frequency of 270 vibration per minute (approx.) ensuring that each square mm. of the sieve is utilized. It can accomodate 200 mm diameter sieves. Fitted 1/4 hp single phase motor.
For operation on 220 V.A.C. supply. Without test sieves and time switch.